Posts Tagged ‘Sony S600 cam repair’
A Sony S600 on/off button fix
The single most aggravating thing about Sony S600s is the on-off button. These cams are really one of the best for homebrew trail camera traps and I really enjoy using them. For some reason the switch tends to bottom out and the cam cannot be turned on. I have seen so many where someone previously used their fingernail to turn it on and off, and after awhile it just collapses and will not work.
Sony S600 on-off switch repair
I like to turn my S600s on before deploying in the forest to check the time, date and other things like mode, ISO, flash on, etc, and trying to turn it on with the sensor can be iffy. There is not enough time to check anything before the sensor tells the cam to shut down…!
Solder points for switch repair
All the Sony P and W-series cams usually do not have this problem and even the S40 button is good. As most of my 600s had this problem, I came up with a simple trick to fix this. A small push-button switch and short wire is soldered onto the pad as shown in the photos. Run the wire through the buttonhole and ‘Goop’ in place. I have now fixed all my S600s like this and they are working very well.
Hope this helps those on the forum with this S600 affliction.
